Breakpoints

No Retina
Retina
XS Screen (480px)
SM+ Screen
SM Screen (768px)
SM- Screen
MD+ Screen
MD Screen (992px)
MD- Screen
LG+ Screen
LG Screen (1200px)
LG- Screen
XL+ Screen (1600px)
Alpine Homologation

Alpine Homologation

Homologation or “course approval” is an important aspect of developing venues in which U.S. Ski & Snowboard athletes can perform at their highest levels. All courses on which FIS and U.S. Ski & Snowboard alpine races are conducted must be homologated or ‘registered’. This process includes the preparation of specific documents describing the course, a site visit and report by a recognized inspector, and payment of the applicable fees.

The homologation process confirms that technical requirements have been met. It provides the organizer and technical delegates with a recommended plan for protective installations. It catalogs important information about courses in use. And it provides an opportunity for areas, clubs, and organizers to discuss protective installations such as ‘B-nets/fencing’, course preparation, and use of the facility with the inspector.

The application for requesting an inspection for homologation and information about the homologation process, inspection, report, documentation and fees, and lists of homologated alpine courses in U.S. Ski & Snowboard, is available in the Resources section.

General Information

All FIS and U.S. Ski & Snowboard alpine races, all events at all levels, must be conducted on FIS or U.S. Ski & Snowboard approved trails, referred to as homologated or registered, following inspection and favorable report.

The applicable rules appear in section 650 of both FIS International Competition Rules and U.S. Ski & Snowboard Alpine Competition Regulations. Clubs, areas, and organizers requesting homologations should familiarize themselves with the requirements per the rules for alpine courses, including the specifications for the events to be conducted – vertical drop and width in particular.

Places/venues need to determine if their interest is for FIS or U.S. Ski & Snowboard homologation, for which events: DH, SG, GS, SL, for full courses or entry-level/registered races (according to vertical drop). The processes, scheduling, inspection, and documentation are similar for FIS and U.S. Ski & Snowboard homologations - although different in some details.

The application to request homologation can be found on the U.S. Ski & Snowboard website at the address above. Additional information is included with the request form. The initial steps of the homologation process include:

  1. Completion of the application form and submission with the required fee to U.S. Ski & Snowboard Competition Services prior to Jan. 1 of the expiration year. Late fees of an additional $50.00 per course apply for applications received after Aug. 15 for FIS courses and after Sept. 15 for U.S. Ski & Snowboard courses.
  2. Assignment of an appropriate inspector by the working group chair, based on the information provided on the application forms.
  3. Contact by the assigned inspector of the responsible person indicated on the application to review the process and rules; schedule the required on-site inspection; and coordinate the development of the documentation and reporting.
    Once the inspector has been assigned and has contacted the responsible person at the place, the process is typically completed in the summer and autumn. Rehomologation may be completed on snow.
  4. The inspector and the responsible person collaborate to compile documentation and verify data, organize and make the inspection, and complete and assemble the report and the required documentation for submission by the inspector.
  5. The place (area or club or responsible person) covers or reimburses inspector expenses, any reimbursement is due at the time of the inspection.
  6. When the report with documentation is complete and expenses paid, the inspector then signs and submits the report recommending homologation - or requiring additional work - or not approving (noting reasons for not-approving).
  7. The FIS or U.S. Ski & Snowboard courses chair accepts the report recommending approval, assigns a homologation number, issues a certificate, and publishes digitally via FIS and/or U.S. Ski & Snowboard.

Once a course has been approved, the homologation or registration has validity limited to five years for DH and SG and to ten years for GS and SL after which reinspection will be required. In case of significant changes to a course, reinspection may be required sooner than this.

All new course inspections must be made in the off-season. Reinspections, in general, can be made at any time of the year.

Applications received prior to the U.S. Ski & Snowboard meetings in May will have priority in the assignment of inspectors. When possible, FIS inspections and reporting should be completed by September 30, and U.S. Ski & Snowboard by October 31, so that the courses can be listed and certificates issued prior to the start of the season. The working group cannot guarantee that inspections can be scheduled and homologations completed for any applications submitted after October 15.

Although U.S. Ski & Snowboard staff, members of the Alpine Courses Working Group, and other ‘key volunteers’ may communicate with a club or area about homologation needs, it is the responsibility of the club/area to initiate a request for homologation or re-homologation. Likewise, the inspector will guide and assist the club/area with the report documentation, but the area/club is responsible for its development, preparation, and completion to the satisfaction of the inspector and of the FIS or U.S. Ski & Snowboard alpine courses chair.

Reports forms in PDF format may be found on the U.S. Ski & Snowboard website. The documentation (exhibits) noted on the second page of each of FIS and U.S. Ski & Snowboard report forms and described in the rules is an integral part and is necessary for approval. Examples of reports and documentation may be found on the U.S. Ski & Snowboard website, and the assigned inspector will provide information and direction.

Due Dates / Deadlines
Priority for assignment of inspectors: May 1 (prior to the USSA Congress)
Next Season Homologation: Jan 1 (first late fee applies after this date)
For FIS re/homologations: August 15 (2nd late fee applies after this date)
For U.S. Ski & Snowboard re/homologations: September 15 (2nd late fee applies after this date)

(There is no guarantee that inspections can be scheduled and homologations completed for any applications submitted after October 15)

Completed reports with required documentation normally are due:

For FIS re/homologations: September 30
For U.S. Ski & Snowboard re/homologations: October 31
Fees / Inspector's Expenses
FIS re/homologation* $250.00 per course per event (includes both genders)
U.S. Ski & Snowboard re/homologation** $150.00 per course per event (includes both genders)
Late application fee:

Max $50.00 per course per event

Replacement of FIS or U.S. Ski & Snowboard homologation file (electronic copy): $25.00 per file/course

* FIS homologation includes USSA homologation for same event on that course
** Exception – U.S. Ski & Snowboard GS and SL on same trail, one common report: $150.00 per course

Fees for FIS and U.S. Ski & Snowboard homologations are due and payable to “U.S. Ski & Snowboard Alpine Course Approvals” and are to be submitted with the application. These fees are applied as the homologation fees, with changes as appropriate following the inspection (additional or refund).

Inspector’s Expenses

Inspectors’ expenses, for both FIS and U.S. Ski & Snowboard homologation or rehomologation, are the responsibility of the venue (place) and must be reimbursed on request of the inspector.

In addition to expenses (travel, meals, etc.) inspectors are paid a daily rate of $180.00 per day for FIS inspections and U.S. Ski & Snowboard inspections. Inspectors are paid for travel days of four hours or greater as well as inspection days.

Alpine Homologation Contacts

For further information on alpine course homologations, you may wish to contact an inspector near you.  While this may not be the inspector assigned to your ski area in response to your application, he or she can give you more information on requirements and procedures.

Name Location Email
Ron Bonneau West - ID rbonneau@collegeofidaho.edu
Mike Browne East - VT alpineofficial@outlook.com
Jeff Byrne East - NY bensonbyrne1980@gmail.com
Dan Chayes East - PA dan@chayes.org
Ellen Galbraith West - WA ellengalbraith@gmail.com
Sam Ganow East - PA samganow@gmail.com
Carl Guenzel West - WA carlg@kiemlehagood.com
Douglas Hall East dohall880@gmail.com
John Jacobs East - NY john@reliableracing.com
Grant Lindemer Central grant_9@msn.com
John Norton East - NY johnn@nysef.org
Roger Perricone Rocky - CO spepperone@aol.com
Ron Rupert Rocky - CO rrracingr30@gmail.com
Ted Sutton East - NH thsutton@roadrunner.com
Art Tokle East - NY atokle@optonline.net
Jacob Treadwell West - UT treadwell304550@gmail.com
Travis Widger East - NY traviswidger@holimont.com
Resources
View All
Information and Application Form
Use the FTP site to get Homologation Reports - password required
About becoming an Inspector
Homologated Equipment